FiberSensor™  Perimeter Intrusion Detection
is BEI Security's high performing, cost-effective security
system designed for low to medium security risk installations.
Detects
intrusion attempts at fence or palisade barriers by means of motion and vibration disturbance. To provide uniform detection and to enhance sensitivity, the sensor cable is
attached to the existing fence by steel wire ties.
What is FiberSensor™?
The FiberSensor is a versatile system based on the use of fiber-optic sensor
cable. Intrusion attempts are detected by motion and vibration disturbance in the
light transmission. It is installed on an existing perimeter fence or barrier or
buried underground.
Why use our fiber optic technology?
We researched and developed the patend for fiber optic security to be the best in the field of perimeter security. Our durable fiber-optic technology can withstand all outdoor elements, from extreme freezing cold to deep ocean bottom depths. We built a cable you can depend on.
How can FiberSensor™ help you or your organization?
Increasing the detection of your secured perimeter is the primary function of FiberSensor ™. It's an intelligent fence designed to detect if and where your perimeter is being penetrated. With 6,500 feet of detection zones in length, FiberSensor will tell you precisely where the detection was made.
What applications is FiberSensor™ used for?
Any perimeter or barrier that needs added detection security is a candidate for SmartFence™ technology. Industrial plants, Nuclear plants, power plants, water treatment facilities, prisons, jails, military bases, commercial property, oil refineries, border protection, Government buildings and airports.
How FiberSensor works:
Coded Infrared (IR) light is sent through the cable sensors from IR transmitters
and is received by IR receivers. Any attempted intrusion such as cutting, climbing
or walking above the FOBS will be detected by an interruption in light transmission
and will trigger an alarm in the Command Center that will locate the intruded
zone.
A Laser Diode (transmitter) launches continuous wave light into a fiber-optic
cable. It appears at the end of the fiber-optic as a speckle pattern of light and
dark patches. Under steady conditions this speckle pattern is stationary. When
pressure or vibration is applied close to the sensor it causes the fiber-optic to
deflect and redistribute the light speckle pattern. This movement or ‘twinkling’
of the speckle pattern is detected by a Photo-Diode (receiver). The output is
electronically processed and fed to a relay that causes an alarm to be activated.Any attempt to cut through or climb over will trigger an alarm. The pressure sensitivity on this section can also be adjusted to accommodate a balance between security and environmental conditions.
FiberSensor™ Operational Facts:
• 99.99% Probability of Detection plus a virtually zero false alarm rate!
• Effective and comprehensive. Designed for minimum to medium security risk installations, FiberSensor ™ delivers the most reliable and effective front-line intrusion detection.
• Immune to EMI and RFI.
It carries no electrical charge, and will not
interfere with avionics or communications.
• No Metal Components. Immune to interference from noise, radio frequencies, electromagnetic or electrostatic fields. Transparent to radar microwaves.
• Durable. Our fiber-optic cable has a 30-year lifespan and will likely outlast your infrastructure! The FiberSensor™ is unaffected by weather, harsh environments, corrosion or UV radiation; it can be installed in fresh or salt water.
• No False Alarms. The FiberSensor™ is not affected by shock, vibration, or wind.
• Versatile. Can be installed as part of a comprehensive integrated system or stand-alone with dry-contact outputs. It can be installed freestanding or attached to any new or existing barriers.
• Integrated GUI. All BEI Security turn-key systems include our advanced System Command Center to provide immediate and reliable data relating to any intrusion attempt. The SCC is vendor-independent, and may be integrated with any new or existing equipment.
Need more information about FiberSensor?
Get the answers you need to know, how this product will provide better detection and security.
|
